VTU 5 Day Online Faculty Development Program

IRIS – Techno Cultural Forum Dept. of ECE, NMIT is organizing 5 Day online Faculty Development Program on Analog and Digital VLSI Design using Modified Open Source EDA and InOhmic Tech Methodologies.

 

Faculty Development Programme Details

Program: Analog and Digital VLSI Design using Modified Open Source EDA and InOhmic Tech Methodologies

Date:30/07/2020 To 03/08/2020

 

Organizing Committee

Dr. Ramachandra.A.C. Professor &HoD, ECE,NMIT

hod-ece@nmit.ac.in

 

Dr. Karunakara Rai B Associate Professor Dept. of ECE, NMIT

karunakara.rai@nmit.ac.in

 

Ms.Sowmya Madhavan Associate Professor, Dept. of ECE

sowmya.madhavan@nmit.ac.in

Ph: 09739308665

 

Ms. Ashitha V Naik Assistant Professor Dept. of ECE, NMIT

ashitha.v@nmit.ac.in

 

How to Register?

Register online using the following Link for Registration https://forms.gle/nc6rMXZm6txtk1z76

Registration Fees:100 per participant

Account Details: GPay to 09739308665

 

About the Workshop

This Course provides participants an insight into the processes involved in taking a VLSI circuit concept to realization. Inohmictech Multiple EDA Supportive Silicon Analytical Methodologies (IMESSAM) eco system is covered in detail in this FDP. This ecosystem which is centralized provides an analytical sense of understanding of the design & required design variations/validations on top of existing methodologies. The participants will be basically trained to use open source EDA tools at industry requirements. For example, there is an exclusive inohmic PD flow for the back end design. All the methodologies followed correlates with the mathematical equation. Very basic open source CAD tools will be utilized for achieving industry standard specifications in this FDP. Target Audience: The workshop can be attended by Research scholars, Faculty members, U.G/ P.G students from ECE/EEE/TCE and Industry Professionals.

Content

• Analog Circuit Design
• Layout Design Overview
• IMESSAM Ecosystem capabilities for drawing schematics.
• Command Line Automation.
• IMESSAM Ecosystem capabilities for drawing layout.
• IMESSAM Ecosystem capabilities for DRC/LVS.
• Stick Diagram Overview
• FSM Functional Check
• SRAM Functional Check
• RTL Synthesis
• Static Timing Analysis
• Inohmic Tech Methodology overview for PDK Behaviour with Mathematical Model
• Complex Memory Complier Demonstration.

 

Agenda/ Schedule of Programme

Date	Timings	Day	Topics Planned	Resource Person
30/07/2020	10:00 to 10:15	Thursday	Introduction to the FDP and the Host Institute, NMIT	Dr Ramachandra A C HoD, Dept. of ECE, NMIT, Bangalore
	10:15 to 11:45		VLSI Design Flow	Dr S L Pinjare, Visiting Professor, Dept. of ECE, NMIT, Bangalore
31/07/2020	09:45 to 12:00	Friday	Spice net listing Simulation through command line Demo to complex IP in IMESSAM ecosystem.	Saikrishna, Inohmic Technologies, Bangalore
01/08/2020	09:45 to 12:00	Saturday	Fabrication basics , Inverter GDS with DRC/LVS	P V Reddy, Inohmic Technologies, Bangalore 02/08/2020 09:45 To
02/08/2020	09:45 to 12:00	Sunday	RTL basics, FIFO hands on Memory, Sequence detector	Venkata , Versha, Inohmic Technologies, Bangalore
03/08/2020	09:45 to 12:00	Monday	PD flow, Synthesis, STA	P Swaroop, Inohmic Technologies, Bangalore

 

Contact Details:

G S Krishna

Inohmic Technologies

Ph:+91 9066320002

email:gsk@inohmic.com

 

Note:

Only First 40 Participants will have access to Open Source CAD Tools from Inohmic Platform.

e- Certificate will be provided on filling the Feedback Form.

 

 

Download Official VTU Notification on 5 Day Faculty Development Program

 

 

FDP on Virtual Laboratory

Department of Computer Science and Engineering, VTU Belagavi in association with VTU FOSS group has organized a FDP on Virtual Laboratory on 19th and 20th February 2020.The resource persons are from NITK Surathkal. This FDP focuses on increasing the awareness about virtual laboratory facility and leveraging its benefits in teaching learning process.FDP aims to motivate the faculty members to involve in the creation of virtual lab facility to cater to the needs of the students.Faculty members attending this program will have a long term association with the project of Virtual Lab facility and contribute towards it's development.

Principals of constituent and affiliated colleges are requested to identify and depute enthusiastic faculty members who would contribute to the development of virtual laboratories. All the details for registration are available on the brochure enclosed with this circular.

 

FDP Date

19th and 20th February 2020

 

Resource Persons

 Dr. K V Gangadharan

Professor, Mechanical Engg

Participating Institute Coordinator (PIC)

NITK Surathkal, 575025, Kamataka, India

 

Dr. Pruthviraj Umesh

Lab Coordinator(Civil)

NITK Surathkal, 575025, Karnataka, India

 

Topics To Be Covered

• Experiential Learning through Virtual Labs
• Practical Implementation of Experiential Learning
• Remotely Operated Vehicles
• Remote Trigger (RT) Lab

 

Who Can Apply?

Enthusiastic faculty from VTU affiliated/constituent who would contribute to Virtual laboratories

 

How to apply?

Register using the registration Link: https://workshop.vtu.ac.in

 

Registration Fee

There is no Registration fee.

 

Venue And Important Dates

Venue: Senate Hall, Visvesvaraya Technological University, "Jnana Sangatna", Belagavi-18

 

Important Dates

Last date for online registration 16/02/2020

Confirmation to the participants 17/02/2020

 

Selection of Participants

Selection is based on First come First Serve. The number of participants is limited to about 60. Selected candidates will be intimated by e-mail.

 

Download FDP on Virtual Laboratory Brochure on 11th Feb 2020

VTU Faculty Development Program on Machine Learning with Python

Program Date: 29th Jan 2020 to 31st Jan 2020

Program organized by

Department of Computer Science and Engineering

S.G. BALEKUNDRI INSTITUTE OF TECHNOLOGY

Shivabasava Nagar, Belagavi-590010

Karnataka, India

Phone: 0831-2407172

Fax: 0831-2407152

Website : www.sgbit.edu.in

 

OBJECTIVES OF THE WORKSHOP

Artificial intelligence is considered to be the trending technology of the future. Machine learning is an application of Artificial intelligence that provides systems the ability to automatically learn and improve from experience without being explicitly programmed. Python is the most popular language for AI and machine learning applied across industries. Python libraries provide a pre written piece of code that help users to access, handle and transform data.Python's machine learning libraries and frameworks simplify the development process and reduce development time. Python's simple syntax and readability promote rapid testing of complex algorithms and make the language accesible to non-programmers.Python is not only comfortable to use and easy to learn but also very versatile.

 

RESOURCE PERSONS

Sessions will be handled by expert from reputed institutions, industry professionals and R & D Organizations.

 

ELIGIBLITY

Faculty members from AICTE approved institutions with relevant background in CSE/ECE/EEE/MCA and IT branches are eligible for the programme.

 

REGISTRATION

Registration Fee for Faculty/Research Scholars: Rs 300/-(lncludes GST) Registration Count is Limited to 40 on First Come First Serve Bases. Payment Method DD In the Name of "Principal SGBIT, Belagavi" or NEFT/RTGS /Phonepe/Google pay, To the Account No: 520101070642180 IFSC: CORP0002090

 

LUNCH

Working lunch will be provided and Limited accommodation for Ladies is available on prior request and early registration for outstation participation.

 

ADDRESS FOR COMMUNICATION

Prof. Mahantesh Laddi

Assistant Professor, Dept, CSE, SGBIT

Phone No:9742912850

Email : mahantesh.laddi@gmail.com

 

Download VTU Official Notification on 20th Jan 2020

 

R N S Institute of Technology, Bengaluru is organising three days Faculty Development Program on "Machine Learning ( 15CS73)" from 19th to 21st July 2018

The objective of this Faculty Development Program is to emphasize hands-on approach for better understanding of Machine Leaning and its experiments, so that the faculties can deliver the best from the syllabus.

Address of Correspondence:
Dr.Girijamma, Professor, Dept., of CSE,
R N S Institute of Technology, Bengaluru
Mob: 9480031494/9164312114

---

R N S Institute of Technology, Bengaluru is organising two days Faculty Development Program on "Web Technology and its Applications" during 23rd and 24th July 2018

The objective of this Faculty Development Program is to emphasize hands-on approach for better understanding of Web Technology and its Applications and related experiments, so that the faculties can deliver the best from the syllabus

Address of Correspondence:
Mr.Manoj Kumar H,
Assistant Professor,
Dept., of ISE,
R N S Institute of Technology, Bengaluru
Mob: 9945616667

---

R N S Institute of Technology, Bengaluru is organising three days Faculty Development Program on "Mobile Applications" from 25th to 27th July 2018

The objective of this Faculty Development Program is to emphasize hands-on approach for better understanding of Web Technology and its Applications and related experiments, so that the faculties can deliver the best from the syllabus

Address of Correspondence:
Mr.K.V.Rama Satish ,
Assistant Professor,
Dept., of MCA,
R N S Institute of Technology, Bengaluru
Mob:  9844329766
Email: ramasatish.k.v@rnsit.ac.in

 

Two weeks Faculty Development Programme on Finite Element Methods & Stress Analysis (22 January 2018 - 3 February 2018)

Organized by

Department of Mechanical Engineering,

CAMBRIDGE INSTITUTE OF TECHNOLOGY, 

K R PURAM, BENGALURU , KARNATAKA

Sponsored by

All India Council for Technical Education (AICTE), New Delhi

Supported by 

Visvesvaraya Technological University (VTU), Belagavi, Karnataka.

In Association with NAFEMS (THE INTERNATIONAL ASSOCIATION FOR THE ENGINEERING MODELLING, ANALYSIS & SIMULATION COMMUNITY) - Industry Partner

FDP Venue
Cambridge Institute of Technology
Chikkabasavanapura, K. R .Puram,
Bengaluru
Karnataka 560036 ,
Phone: 080-25618798/25618799

Contact Details:
Dr. S. Shankar- Professor & Programme Convener
Department of Mechanical Engineering
Cambridge Institute of Technology
K.R. Puram, Bengaluru – 560036
Mb : 09620543017,09886554111
All India Council for Technical Education

Email: research.mech@citech.edu.in

 

Faculty Development Programme [FDP]- Objectives

The primary purpose of this program is to enable the faculty with skills and proficiency in the domains of AERO/AUTO/CIVIL/MECH/Industrial Engineering and Production disciplines in applying FEM tools in writing mode with appreciation for practical problems to best practices that are integral with industry relevant solutions. This program offers excellent guidance on how to judge which approximations are acceptable and make it appropriate for solving a wide range of practical problems of equal importance i the n manner in which the results are interpreted. Assistances are provided which would result into correct decisions to be taken based on reliable results. Interaction and deliberations are encouraged throughout the programme.

Salient aspects of this Faculty Development Programme are:

• The FDP handled by experienced professionals/industry users of FEM having over 20+ years of experience.
• Course offer vital guidance to judge which approximations are acceptable for solving practical problems.
• The methods of verifying and validating FEM results would be demonstrated with real world case studies.
• The globally recognized NAFEMS benchmark standards for FEM would be explained.
• Strong theoretical inputs and relevant practical training would go hand in hand.
• Each participant would be provided with high quality training study materials.
• Industry visits to FEM practicing industries.
• Emphasis is more on practical aspects of FEM and case studies.
• FDP designed to enhance the functional knowledge of FEM users for practical applications.

 

Main topics covered in the Faculty development Programme:

• Basic Introduction to FEA, Direct Stress and Strain, Shear Stress and Torsion, Fatigue and Impact and Stiffness Calculations
• FEM - 1D and 2D formulations, Example problems of 1D elements, 2D Plane stress / Plane strain / Axi – symmetric problems
• 3D formulations and Meshing Methods - Introduction to the Real World in 3D, Example of Simple 3D Analysis, Processing & Preparing CAD Data for Analysis and Fast Meshing Methods
• Practical Aspects - Failure & Fatigue analysis, Post processing techniques and performance optimization through simulation
• Use of material models in FE, classes of materials, linear Elastic, isotropic, orthotropic, Anisotropic Materials
• Quality & Verifications Aspects – Experimental verification & validation of FEM results
• Case studies from Automotive / Defense / Aeronautics

Who should Attend this Faculty Development Programme

This FDP would be useful for professional development of researchers, faculty members and trainers working in universities, colleges, professional institutes, staff training colleges, training centers of industrial organizations, staff training institutes of central and state governments and practicing engineers on FEM and Allied subjects. Selection will be based on FCFS basis and limited to maximum of 50 participants only. A certificate of participation shall be provided to all the participants

 

Registration Details for the Faculty Development Programme

 

Registration Fees:

• Faculty from AICTE Approved Institutions - Rs. 500/- (Refundable), the amount will be forfeited if a participant does not attend the FDP
• Participants from Industry / R & D establishments (fee of Rs.10,000/- to be borne by participants and Non-Refundable).

Please Note:

• Travel allowance will be provided for outsta..on par..cipants on produc..on of actual ..ckets, to and fro once (limited to III tier AC train fare or BUS fare by shortest route, as per norms).
• Tea, snacks & working lunch will be provided to par..cipants on all days.
• Boarding & Lodging will be arranged for outsta..on candidates. Participating Candidates are informed to send requests to the FDP coordinator well in advance to facilitate accommodation
• A standard reference Book on FEM, Study materials, standard kits will be given to all participants. 

 

Registration fee is payable as DD in favour of "Principal, Cambridge Institute of Technology Research Project" payable at Bangalore and send it to FDP Convener by registered post along with duly filled in application form.

 

Important Dates :

• Last date for receipt of filled in application along with DD by post : 6th January 2018
• Date of Intimation to selected participants (by mail/phone) : 12th January 2018
• Agenda and Schedule will be notified lated by mail to selected participants.

 

Resource Expert Speakers 

Dr. K. Raghavan, Discipline Chief-Structure ,Cyient Ltd., Hyderabad
Qualification: Ph.D. (IIT Kanpur)
Experience:Over forty years of experience in design, analysis and simulation activities in BHEL and Cyient Infotech

• Authored NAFEMS Manual on “Best practices of Analysis” and Chief Mentor for NAFEMS India activities since inception
• In the current role at Cyient, he is responsible for ensuring the quality of CAE practices in national and global projects
• Research Interest are Structural Analysis, Stress and Vibration Analysis of structures and Finite Element Analysis

Dr. Dilip K Mahanty, Professor ,Mechanical Engineering NMIMS University
Qualification: Ph.D. (IIT Bombay)
Experience:Over twenty-eight years of experience in design, analysis and simulation activities in Industry and Institutes.

• He is the Vice Chairman of NAFEMS India activities since inception
• Guided several students in PG / Doctoral levels. Published extensively in fracture mechanics and nonlinear analysis.
• In the current role at NMIMS University, he is responsible for spreading knowledge on FEA best practices. 

Dr. Sreehari Kumar B, Senior Consultant ,TCS
Qualification: Ph.D. (IISc, Bangalore)
Experience:Over twenty-five years of experience in Finite Element software product development and Engineering Services.

• Has wide exposure to engineering services verticals of Automotive, Aerospace, Defense, Space, Nuclear sectors.
• In the current role at TCS, he is responsible for Software development of a large-scale, general-purpose commercial finite element analysis code for linear and nonlinear static, structural dynamics analysis.

Mr. Nitin S. Gokhale, CEO ,Finite to Infinite
Qualification: M.Tech (IIT Bombay)
Experience: 20 years' experience in CAE Projects: 3 years stint at Mahindra & Mahindra

• Carried out more than 250 successful projects & 300 corporate CAE trainings for Indian and Overseas clients
• Extensive exposure to IDEAS, HyperMesh, Nastran, Ansys, Optistruct and FEMFAT.
• Authored book on Practical Finite Element Analysis

Mr. S. Rajagopal, Scientist F (ADE), DRDO
Qualification: M.Tech (IISc, Bangalore)
Experience: Working as a Scientist in the Aeronautical Development Establishment (ADE),

• Defence Research and Development Organization (DRDO), Bangalore since 1996.
• Expertise in Multidisciplinary Design Optimization (MDO) for Unmanned Aerial Vehicle
• Conceptual product design with focus on aerodynamic and structural analysis

Dr. Ganapathi Manickam, Former Delivery Head VP, Tech Mahindra
Qualification: Ph.D. (IIT Madras)
Experience: 35 Years of Experience in R & D Institutions, Global Industries, Training & Teaching in advanced Institution.

• He was former scientist in DRDO and worked on DRDO's Missile Development Program
• His area of expertise is Computational Mechanics, Vibration & Aero-elasticity, Nonlinear Structural Mechanics and Advanced Composites.

Dr. Kumar Kenche Gowda, Professor & Head, ME, Vivekananda Institute of Tech.
Qualification: Ph.D. (PESCE Mandya)
Experience: He has 18 years of teaching experience.

• His research areas include Aircraft Engines, Wind Turbines etc.
• He has rich experience in the field of Aircraft structural analysis, Turbo- Machinery, Heavy engineering.

Mr. Uma Maheshwar, Executive Chief Consulting Engineer, GE Aviation
Qualification: M.E (NIT Trichy)
Experience: He has over 25 years of experience in Advanced Design, Engineering, Manufacturing, Technology development and CAE domains.

• Currently involved in design & development of next generation propulsion systems, support of engine fleet and development of customized engineering tools.
• He was involved in design & development of GEnx, LEAP56, LEAP-X, PASSPORT20, GE9X engine programs covering –Architectural evaluation, Cycles, Mechanical, Rotor Dynamics, Thermal systems, Combustion Aero, Turbine Aero, Acoustics design disciplines.

Dr. C. S. Ramesh, Dean of Engineering, Alliance University
Qualification: Ph.D. (IIT Madras)
Experience: He has over 28 years of experience in teaching and research. His current research interests are Thermal spray coatings, Metal matrix
Composites, Finite Element methods related to Bio- implants.

• He has executed projects of national and international importance funded by Naval Research Board, AR&DB, CVRDE, DST, ISRO, GE- India, Allegion, BHEL, AICTE. Recognizing the research activities, Govt. of Karnataka has conferred with Professor Satish Dhawan Award for Young Engineers for Outstanding Contribution to Engineering Science-2008

Dr. Rajeev Jain, Scientist G, GTRE, DRDO
Qualification: Ph.D. (IISc. Bangalore)
Experience: He has 30 years of research experience and heads impact mechanic group at GTRE, DRDO

• He has a vast experience in the field of non-linear finite element analysis to design gas turbine engine components from engine safety point of view.
• Recipient of Technology Innovation award 2013-14 from Ministry of Chemicals and Fertilizers, Government of India

Dr. Karodi Venkateswarlu, Principal Scientist ,NAL, CSIR
Qualification: Ph.D (IIT Kharagpur)
Experience: He w has more than 30 Years of Experience in Research & Development. He has expertise in Materials Engineering, Mechanical
characterization, materials processing and composites.wHe is a recipient of various awards and accolades

• He has published over 200 paper in various journals and conferences

Mr.Krishnamurthy. G.S ,Group Manager- CAE, Royal Enfield Group Manager- CAE Royal Enfield
Qualification: B.Tech (Anna University) Automobile Engineering
Experience: He has more than 20 years of experience in the automotive industry

• He has Wide knowledge and experience on key domains of Automotive design and worked extensively on Testing of automotive structures
• Experience in developing full life cycle including requirement gathering, analysis, design, development, testing & certification of Automotive structures

 

AICTE - VTU joint Training Programme

All India Council for Technical Education (AICTE) aand Visvesvaraya Technological University(VTU) is jointly organizing the training programme for Teachers in AICTE's approved and VTU Affiliated Colleges between 26th- 30th August 2019 at VTU Centre for Post Graduate Centre, Muddenahalli - reg.The objective of the training programs is to prepare them for being successful in a knowledge society.

 

Date & Venue of Training Programme

As a part of the above, a training program is organized on "Effective Teaching Techniques in Digital Signal Processing" between 26th - 30th August 2019 at VTU Centre for Post Graduate Studies, Muddenahalli, Chickaballapur, Karnataka 562101.

 

About Digital Electronics & Communication Systems:

M.Tech. in Digital Electronics & Communication Systems (DECS) is established in the year 2011 with an intake of 25 students. Department of DECS is committed to provide thorough understanding and application of core knowledge in design of Digital Communication Systems. Also encourage student’s analytical and problem solving skills, creative thinking, and adoptability to rapid changes in the industry and societal issues.

 

Programme Objectives:

The objective of the AICTE – VTU Training Progrmme is to conduct training for the faculty members to prepare them for being successful in a knowledge society and fulfill the following important Teaching Techniques in a subject.

• Understand the frequency domain sampling and reconstruction of discrete time signals.
  
• Study the properties and the development of efficient algorithms for the computation of DFT.
  
• Realization of FIR and IIR filters in different structural forms.
  
• Learn the procedures to design of IIR filters from the analog filters using impulse invariance and bilinear transformation.
  
• Study the different windows used in the design of FIR filters and design appropriate filters based on the specifications
  
• Understand the architecture and working of DSP processor
• 
  Applications of DSP

 

Programme Outcome:

• Determine response of LTI systems using time domain and DFT techniques.
• Compute DFT of real and complex discrete time signals.
• Computation of DFT using FFT algorithms and linear filtering approach.
• Design and realize FIR and IIR digital filters and Understand the DSP processor architecture Resource Persons: Renowned Experts from reputed Institutions like IISc., Bengaluru, IIT’s, NIT’s and Senior Faculties of VTU.

 

Eligibility:

The Faculty Members who are handling Digital Signal Processing at UG & PG level in Electronics & Communication Engineering/Electrical and Electronics Engineering/Telecommunication Engineering/Electronics and Instrumentation Engineering are eligible for participating in the Training Program.

 

Registration Fee:

There is no Registration Fee

 

Accommodation & Food:

For Outstation Participant’s Free accommodation and for all participants Food will be provided in institute hostels.

 

TA will be provided to the outstation Participants as per the norms of the programme.

 

How to Apply:

Interested and eligible candidates may apply by submitting the hard copy of the filled in registration format given in this brochure to The Coordinator, VTU Center for PG Studies, Muddenahalli and also by sending the scanned copy of the filled in registration form by e-mail to vtucpgsb@gmail.com on or before 23rd August 2019.

 

Last date to Apply:

23rd August 2019

 

Selection of the Participants:

AICTE-VTU Training Progrmme will be of FIVE Days residential programme with minimum 40 participants. Selection will be on first cum first serve basis. Selected candidates will be intimated by e-mail on 24th August 2019.

 

Contact Details for Information:

Dr.Sarika Raga Mob: 9481470671

Mrs.Reshma.M Mob: 9035014392

Email: vtucpgsb@gmail.com

 

Download VTU Official Circular